Installation & Assembly

page 2
Assembly Instructions
STEP 3
Secure the fixture to the mounting unit with the cap nuts.
Install the bulbs (not included). Place the shade over the
fixture and secure the assembly.
STEP 1
Use the mounting screws to attach the mounting
unit to the junction box
STEP 2
Make the electrical connection from the junction
box to the fixture. Connect the ground wire to the
mounting unit using the preinstalled green ground
screw. Then, connect the positive, negative and
ground wires with the supplied wire nuts. Secure
with electrical tape
Connect Clear, Brown, Gold or
Black Parallel Wire without tracer
(round & smooth) or Black Fixture
Wire to:
Black or Red Supply Wire or
Insulated Wire (other than green)
with copper conductor.
Connect Clear, Brown, Gold or
Black *Parallel Wire with tracer
(square & ridged) or White Fixture
Wire to:
White Supply Wire or Insulated
Wire (other than green) with silver
conductor
Copper
Silver
Smooth
Ridged
WALL LANTERN