Wicker Rocking Bistro Set Assembly Manual
Rocking Wicker Bistro Set .. .. Assembly Instruction Before assembling, make sure that you lay out and identify all parts listed below in the parts list. Install on level ground. Keep in mind that not to tighten screw until you fully set up ,After set up, fully tighten screws.
Rocking Chair (DO THIS TWO TIMES) Item No. Reference Image Description QTY A Seat Back 1PC B Seat Base 1PC C1 Right Arm Rest 1PC C2 Left Arm Rest 1PC Seat Back Support 1PC M6x35 Socket Head Cap Screw 4PCS F M6x20 Socket Head Cap Screw 8PCS G Flat Washer 12PCS H Screw Cover 12PCS I 4-mm Allen Key 1PC D E 1. Attach the seatback (A) and the seat base (B) using a M6 x 35 socket head cap screw (E) with a flat washer (G) .Do this in two places. 2. Flip the assembly upside down .
Rocking Chair (DO THIS TWO TIMES) 3. Flip the assembly back. Secure the seat back (A) using M6 x 35 screws (E) with a washer (G). Do this in two places. 4. Attach the seat back support (D) using M6 x 20 screws (F) With a washer (G). Do this in four places. 5. 3 Completly assembly,then fix and tighten all the screws. Finally place the screw covers (H) over them.
Coffee table Item No. Reference Image Description Table Top J QTY 1PC 2PC K Legs L Leg Support 2PC M Glass Top 1PC 1. Flip the assembly upside down. Attach the table top (J) and the legs(K) using a M6x35 socket head cap screw (E) with a flat washer (G). Do this in four places. M6x35 Socket Head 4PCS Cap Screw M6x20 Socket Head 8PCS Cap Screw Flat 12PCS Washer E F G Screw Cover 4-mm Allen Key H I K K 12PCS 1PC J 2.
Coffee table 3. Flip the assembly back then place the glass top (M) on it. M 4. Completly assembly,then fix and tighten all the screws.Finally place the screw Covers (H) over them.
