Installation & Assembly

4 5
E. For drilling into wood:
Drill at each mark with the 3/32” drill bit.
Screw brackets into place with screwdriver.
For drilling into drywall:
Drill a pilot hole at each mark with the 7/32”
drill bit. Insert drywall anchors. Screw
brackets into place with screwdriver.
A. Slide headrail into brackets. Close brackets.
Hook the hole at the top of the wand, over the
hook protruding from the front
of the headrail.
A. Slide valance clips into channel on the back
of the valance. Space evenly.
B. Push the valance clips over the front lip of the
blind headrail until they snap into place.
OUTSIDE MOUNT
A. Slide valance clips into channel on the back
of the valance. Space evenly.
B. Slide valance corner into channel on both
ends of the back of the valance.
C. Slide valance returns onto valance corners on
both ends.
D. Push the valance clips over the front lip of the
blind headrail until they snap into place.
A. Slide headrail into brackets.
Close brackets.
E
3. MOUNT HEADRAIL
INSIDE MOUNT
4. INSTALL WAND
5. INSTALL VALANCE
INSIDE MOUNT
OUTSIDE MOUNT
A
A
Click!
Click!
A
A
B
B
C
D