Installation & Assembly

6 3
D. For drilling into wood:
Drill at each mark with the 3/32” drill bit.
Screw brackets into place with screwdriver.
For drilling into drywall:
Drill a pilot hole at each mark with the 7/32”
drill bit. Insert drywall anchors. Screw
brackets into place with screwdriver.
OPTION A OPTION B
D
A. Center headrail over window and mark corner
at both ends. Ensure that it is level.
B. Identify the Left and Right brackets and open.
C. Align brackets with marks made in step A.
Mark screw holes.
D. Center and mark center support bracket (for
blinds 48” & wider).
2. MOUNT BRACKETS
OUTSIDE MOUNT
A
B
LEFT BRACKET RIGHT BRACKET
C
D
Lower blind to desired length. Mount hold
down brackets. Insert pin into hole of bottomrail.
OPTIONAL: INSTALL HOLD DOWN BRACKETS
Use only if you wish to secure the blind to the bottom of the window.