Installation Instructions
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION INSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONS
For
For
For
For Flush
Flush
Flush
Flush Mount
Mount
Mount
Mount Ceiling
Ceiling
Ceiling
Ceiling Fixtures
Fixtures
Fixtures
Fixtures
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER .
MOUNTING
MOUNTING
MOUNTING
MOUNTING THE
THE
THE
THE FIXTURE
FIXTURE
FIXTURE
FIXTURE (Fig.1)
(Fig.1)
(Fig.1)
(Fig.1)
1. Shut off the power at the circuit breaker box. Remove old
fixture and all hardware from Junction Box.
2. Carefully unpack your new fixture and lay out all the parts
on a clear area. Take care not to lose any small parts
necessary for installation.
3. Thread the pipe screw part way into the center hole of the
single bar and secure with hex nut.
4. Attach the single bar to the junction box using two box
screws . The side of the single bar marked “ GND ” must face
out.
5. While holding the plate(A) assembly towards the ceiling,
connect the electrical wires as Shown in Fig.2, making
sure that all wire nuts are secured.
You
may have to wrap
the connections with electrical tape. If your outlet has a
ground wire (green or bare copper) , connect the fixture
ground wire to it . Otherwise connect fixture
’
s ground wire
directly to the Mounting strap with the green screw
provided. After wires are connected, tuck them carefully
inside the Junction Box.
6. Raise plate(A) onto the junction box, aligning pipe screw on
single bar with center hole in plate and lock it securely with
the cup nut(C).
7.
7.
7.
7. Install the light bulbs in accordance with the fixture
’
s
specifications. NOTE:
NOTE:
NOTE:
NOTE: DO
DO
DO
DO NOT
NOT
NOT
NOT EXCEED
EXCEED
EXCEED
EXCEED THE
THE
THE
THE
SPECIFIED
SPECIFIED
SPECIFIED
SPECIFIED
WATTAGE.
WATTAGE.
WATTAGE.
WATTAGE.
8. Slide the hook (B) to right until becoming , then raise
glass(D) into the hooks.
NOTE:
NOTE:
NOTE:
NOTE:
You
You
You
You
can
can
can
can also
also
also
also use
use
use
use another
another
another
another way
way
way
way to
to
to
to install
install
install
install the
the
the
the
l
l
l
l amp,
amp,
amp,
amp, please
please
please
please see
see
see
see fig.3.
fig.3.
fig.3.
fig.3.
Your
Your
Your
Your
installation
installation
installation
installation is
is
is
is now
now
now
now complete.
complete.
complete.
complete. Return
Return
Return
Return power
power
power
power to
to
to
to the
the
the
the
junction
junction
junction
junction box
box
box
box and
and
and
and test
test
test
test the
the
the
the fixture.
fixture.
fixture.
fixture.
Fig.1
Fig.1
Fig.1
Fig.1
Junction Box
Box
screw
Pipe screw
Single
bar
A
B
C
D
Fig.3
Fig.3
Fig.3
Fig.3
plastic
anchors
wood
screw
ceiling
Fig.2
Fig.2
Fig.2
Fig.2
MIN 90
℃ SUPPLY CONDUCTORS
White or
HOUSE
Black
WIRES
(Hot)
Smooth
FIXTURE
WIRES
Black or
Ribbed
WIRES
FIXTURE
Bare Copper(Ground)
FIXTURE
WIRES
Copper
(Ground)
HOUSE
(Neutral)
WIRES
White
Bare
Green or
WIRES
HOUSE
Listed
U
L
R