Installation Instructions

INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION INSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONS
For
For
For
For Wall
Wall
Wall
Wall Mount
Mount
Mount
Mount Fixture
Fixture
Fixture
Fixture
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER .
MOUNTING
MOUNTING
MOUNTING
MOUNTING THE
THE
THE
THE FIXTURE
FIXTURE
FIXTURE
FIXTURE
Installation (see fig.1)
1. Disconnect power at main electrical panel before
installation.
2. Thread the two mounting screws about 1/4 ” into the
pre-drilled holes in the mounting plate, spaced about the
same distance apart as the holes in the fixture back plate.
Attach the mounting plate to the junction box using two
junction box screws . The side of the mounting plate
marked “ GND ” must face out.
3. Guide fixture wires through hole in center of mounting
plate.
4. Follow wiring instructions carefully (see fig.2)
5. Place the fixture body (A) over the mounting plate ，
aligning the holes with mounting screws, then screw the
ball nuts (E) onto the mounting screws .
6. Raise the glass shade( C ) to bottom of the lamp socket ( B ) ，
and using the ring ( D) by turning it clockwise until tight.
7
7
7
7 .
.
.
. Install the light bulbs in accordance with the fixture ’ s
specifications. DO
DO
DO
DO NOT
NOT
NOT
NOT EXCEED
EXCEED
EXCEED
EXCEED THE
THE
THE
THE MAXIMUM
MAXIMUM
MAXIMUM
MAXIMUM
WATTAGE
WATTAGE
WATTAGE
WATTAGE RATING!
RATING!
RATING!
RATING!
Wiring (see fig.2)
1. Connect the electrical wires as follows. Connect the
Black wire from the fixture to the black house (hot)
Wire. Connect the white wire from the fixture to the white
(neutral) house wire. Make sure all wire nuts are secured.
You may wrap the connections with electrical tape. If
your outlet box has a ground wire (green or bare copper)
connect fixture ’ s ground wire to it. Otherwise attach the
bare copper fixture wire to the green ground screw on the
mounting plate .
2.Tuck the wire connections neatly into the wall junction
box.
F ig.1
Fixture Ground Wire
A
B
C
D
E
Fig. 2
White or
HOUSE
Black
WIRES
(Hot)
Smooth
FIXTURE
WIRES
Black or
Ribbed
WIRES
FIXTURE
Bare Copper(Ground)
FIXTURE
WIRES
Copper
(Ground)
HOUSE
(Neutral)
WIRES
White
Bare
Green or
WIRES
HOUSE
Listed
U
L
R