Assembly Instructions

HARDWARE LIST
NO Description Qty Sketch NO Description Qty Sketch
1
Long bolt
(M6x80mm)
4
2
Medium bolt
(M6x60mm)
4
3
Short bolt
(M6x40mm)
2
4
Lock Washer
(Ф6.5x9)
10
5
Flat Washer
(Ф6.5x19)
10
6
Allen Key
(4mm)
1
STEP 1
Attach frame (B) to the back (A) by using bolts (3) and (1) and washers (4) and (5). Tighten with Allen
Key (6).
Note: DO NOT tighten any of the bolts, until the chair is assembled, then put on a flat level surface to
make sure the chair is level and then tighten the bolts.
X2
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you
have all of the following hardware:
SLATTED BACK CHAIR WITH FAUX LEATHER SEAT
- 3 -