Installation Instructions

2
1A
Secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Neatly place the wires into the junction box, mount the fixture base onto the mounting plate studs, and secure it
with the cap nuts.
Screw the lamp into socket. Refer to the label on the socket for Max Wattage Information.
install the shade to the frame and secure it in place with the clips.
Install the frame to the fixture and secure them together using the thumb screws.
Caulk around the base of the fixture with waterproof construction sealant.
1
2
3
4
5
Install the Fixture
7
6
7
8
9
9
JUNCTION BOX
MOUNTING
PLATE
8
CAP NUT
FRAME
LAMP
6
CLIP
1
NEUTRAL
WIRE
HOT
WIRE
BLACK
WIRE
WHITE
WIRE
MOUNTING
PLATE STUD
THUMB SCREW
3
4
1
9
SHADE
7
8
7