Installation Instructions

Installation Instructions for

CAUTION RISK OF FIRE-

This product must be installed in accordance with

the applicable installation code by a person familiar

with the construction and operation of the product

and the hazards involved.

Use minimum 90°c supply conductors.

GP I :ENERAL RODUCT NFORMATION

These fixtures are intended to be installed utilizing compliant junctionNEC

boxes.

This product is safety listed for wet locations.

Incandescent lamps may be dimmed with a standard incandescent dimmer.

LED LEDlamps may be dimmed with a dimmer. Consult lamp manufacturer for

additional information.

This instruction shows a typical installation.

Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage information.

Screw the fixture loop to the top of the fixture.

Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.

For wet locations, caulk around the base of the fixture with waterproof construction sealant.

FIXTURE

LAMP

Small Outdoor Wall

PAGE 1
Installation Instructions for Small Outdoor Wall GENERAL PRODUCT INFORMATION: These fixtures are intended to be installed utilizing NEC compliant junction boxes. Incandescent lamps may be dimmed with a standard incandescent dimmer. LED lamps may be dimmed with a LED dimmer. Consult lamp manufacturer for additional information.
PAGE 2
ATTENTION : RISQUE D'INCENDIE Ce produit doit être installé conformément au code d'installation en vigueur par une personne familière avec la construction et l'exploitation du produit et les risques qu'il entraîne. Utiliser les conducteurs d'alimentation supérieure à 90° c. 1A 2 BOUCLE DE LUMINAIRE 3 LUMINAIRE 1 AMPOULE 4 1 Vissez les ampoules dans les douilles. Reportez-vous à l'étiquette sur la prise pour les informations Max Wattage. 2 Vissez la boucle du luminaire sur le dessus du luminaire.
PAGE 3
PRECAUCIÓN: RIESGO DE INCENDIO Este producto debe instalarse de acuerdo con el código de instalación aplicable por una persona familiarizada con la construcción y operación del producto y los riesgos que conllevan. Utilizar conductores de suministro mínimo 90° c. 1A BUCLE DE LÂMPARA 2 3 LÂMPARA 1 BOMBILLA 4 1 Instale los tubos de la vela deslizandolos sobre los enchufes. 2 Atornille las bombillas en los enchufes. Consulte la etiqueta en el enchufe para obtener información sobre el Vatiaje máximo.