Instruction Manual

Fig. 1

Solar Lamp Location:

For optimum light duration throughout the night, it is very important to place

the solar panel in a spot where it will receive the maximum amount of direct

sunlight throughout the day. Also, for best results install your solar panel

facing the south.

Note: For best results, allow the solar lamp to be charged for two consecutive

sunny days in the “ON” position.

Assembly and operation Instructions (Fig. 1 and Fig. 2)

NOTE: The following steps are for reference only. Consult your local

hardware store for the best installation method for your particular surface.

1. Use an electric drill to make four holes in the desired surface.

Place provided anchors into holes, place the base of the lamp

2. Screw part (A) into Part (C) and turn the Low/Off/High switch

located on the lamp head (E) to Low or High position

according your preferences (Fig. 2).

1. Use an electric drill to make two holes in the wall, place

provided anchors into holes, place the wall bracket in line with

the holes and attach with the provided screws.

2. Screw part (D) into Part (A) and turn the Low/Off/High switch

located on the lamp head (E) to Low or High position

according your preferences (Fig. 2).

(Post Mount)

(Wall Mount)