Installation & Assembly

Spare Parts List:
The following parts are available for re-order if damaged or missing.
A: 6-1/4"
B: 9-1/2"
C: 7-3/4"
11. Attach the pipe strap to the connected pipe at the bottom, then secure it to the wall by using dry wall screws.
a) If the wall material is wood:
Attach the pipe strap to the wall, thread the dry wall screws through the holes on pipe strap, then secure them to the
wall.
b) If the wall material is cement:
Mark the holes where you want to place the pipe strap on the wall. Drill the holes and insert the anchors into the
holes, then attach the pipe strap to the wall, thread the dry wall screws through holes on pipe strap, and then secure
them into the anchors.
12. Attach the shade onto the bracket and secure it with the socket ring.
13. Install bulb (not included). See relamping label at socket area or packaging for maximum allowed wattage.
14. Insert the plug into the wall receptacle.
Note:Remove the cover from the plug when the plug is used for the first time.
Page 4
Turn on the power at fuse or circuit box.
Green Grounding
Screw (E)
Wire Nut (F)
Lock Nut (D)
Ball Nut (G)
Cross Bar(A)
Strain Relief (H)
Pipe Strap (N)
Dry Wall Screw (O)
Anchor (L)
Swivel (I)
Hex Nut (J)
Washer (K)
Threaded Pipe (M)
Short Screw (B)
Long Screw (C)
LIMITED WARRANTY: