Installation & Assembly

page 2
Assembly Instructions
FLUSHMOUNT LANTERN
STEP 1
Place the canopy over the mounting unit and
secure the fixture with the cap nuts.
STEP 3
Place the fixture over the mounting unit and
secure with the lock nut.
STEP 2
Make the electrical connection from the junction
box to the fixture. Connect the ground wire to the
mounting unit using the preinstalled green ground
screw. Then, connect the positive, negative and
ground wires with the supplied wire nuts. Secure
with electrical tape
Connect Clear, Brown, Gold or
Black Parallel Wire without tracer
(round & smooth) or Black Fixture
Wire to:
Black or Red Supply Wire or
Insulated Wire (other than green)
with copper conductor.
Connect Clear, Brown, Gold or
Black *Parallel Wire with tracer
(square & ridged) or White Fixture
Wire to:
White Supply Wire or Insulated
Wire (other than green) with silver
conductor
Copper
Silver
Smooth
Ridged
STEP 4
Install a bulb (not included).