Use and Care Guide

DIMENSIONS AND TOLERANCES (IN INCHES) OF SPIGOTS

AND BARRELS FOR HUBLESS PIPE AND FITTINGS

Inside Outside Outside Width Thickness Gasket

Barrel Diameter Diameter Spigot of Positioning

Diameter Barrel Spigot Bead Barrel Lug

Size N

B J M (± .13) T-Nom. T-Min. W

⁄

1.50 ± .09 1.90 ± .06 1.96 ± .06 .25 .16 .13 1.13

2 1.96 ± .09 2.35 ± .09 2.41 ± .09 .25 .16 .13 1.13

3 2.96 ± .09 3.35 ± .09 3.41 ± .09 .25 .16 .13 1.13

4 3.94 ± .09 4.38 + .09 4.44 ± .09 .31 .19 .15 1.13

– .05

5 4.94 ± .09 5.30 + .09 5.36 ± .09 .31 .19 .15 1.50

– .05

6 5.94 ± .09 6.30 + .09 6.36 ± .09 .31 .19 .15 1.50

– .05

8 7.94 ± .13 8.38 ± .09 8.44 ± .09 .31 .23 .17 2.00

10 10.00 ± .13 10.56 ± .09 10.62 ± .09 .31 .28 .22 2.00

12 11.94 ± .09 12.50 ± .13 12.62 ± .13 .31 .28 .22 2.75

15 15.11 ± .09 15.83 ± .13 16.12 ± .13 .31 .36 .30 2.75

Hubless Cast Iron

GENERAL INFORMATION

• NEVER test with or transport/store

compressed air or gas in Cast Iron pipe

or fittings.

• NEVER test Cast Iron pipe or fittings

with compressed air or gas.

• ONLY use Cast Iron pipe and fittings

for drain, waste and vent or sanitary

sewer applications.

Testing with or use of compressed air or gas in Cast Iron

pipe or fittings can result in explosive failures and cause

severe injury or death.

Cast Iron pipe and fittings are only intended for DWV

(drain, waste and vent) non-pressure applications. Using

cast iron pipe and fittings in pressure applications could

result in explosive failures, causing serious injury or death

or property damage.