Use and Care Guide

18
Cast Iron Installation
GENERAL INFORMATION
A
Nominal inside diameter.
B
These tolerances apply to each foot of extra-long fittings in excess of regular laying lengths specified herein.
2 -0.13 ±0.09
3 -0.13 ±0.09
4 -0.13 ±0.09
5 -0.13 ±0.09
6 -0.13 ±0.09
8 -0.13 ±0.09
10 0.13 ±0.09
12 -0.13 ±0.11
15 -0.13 ±0.11
Width of Distance from Lead Groove
Size Hub Bead to End, Pipe and Fittings
F P
2 ±0.06 ±0.09 ±0.09 ±0.06 ±1/4 ±1/2 ±1/8 ±1/16
3 +0.09
– 0.06 ±0.09 ±0.09 ±0.06 ±1/4 ±1/2 ±1/8 ±1/16
4 +0.09
– 0.06 ±0.09 ±0.09 ±0.06 ±1/4 ±1/2 ±1/8 ±1/16
5 +0.09 ±0.09 ±0.09 ±0.06 ±5/16 ±5/8 ±3/16 ±3/32
– 0.06
6 +0.09
– 0.06 ±0.09 ±0.09 ±0.06 ±5/16 ±5/8. ±3/16 ±3/32
8 ±0.13 ±0.13 ±0.13 ±0.13 ±5/16 ±5/8 ±3/16 ±3/32
10 ±0.13 ±0.13 ±0.13 ±0.13 ±3/8 ±3/4 ±1/4 ±1/8
12 ±0.13 ±0.19 ±0.19 ±0.19 ±3/8 ±3/4 ±1/4 ±1/8
15 ±0.13 ±0.19 ±0.19 ±0.19 ±3/8 ±3/4 ±1/4 ±1/8
Inside Outside Inside Tele-
Diameter Diameter Diameter scoping Laying Length
of Hub of Barrel of Barrel Length
Size
A
Pipe, Pipe, Fittings
A’ J B Y 2
1
⁄2 -, 3
1
⁄2 -, 5-ft 10-ft Extra
Lengths Lengths Regular Long
B
{
{
{
{
DIMENSIONAL TOLERANCES FOR EXTRA HEAVY AND SERVICE CAST IRON SOIL
PIPE & FITTINGS
(Telescoping Length)
Laying Length
BJAT
Y
P
G
R
1/8
S
F