Use and Care Guide

13
PRODUCT CERTIFICATION
Specifications Charlotte® Cast Iron Soil Pipe and Fittings
GENERAL INFORMATION
SERVICE HUB AND SPIGOT PIPE AND
FITTINGS
All cast iron soil pipe and fittings shall be marked
with the collective trademark of
the Cast Iron Soil Pipe Institute.
ASTM A 74
ANSI A 112.5.1
Listed by NSF
®
International
ISO 9001:2008 Certified
EXTRA HEAVY HUB AND SPIGOT PIPE AND
FITTINGS
All cast iron soil pipe and fittings shall be marked
with the collective trademark of
the Cast Iron Soil Pipe Institute.
ASTM A 74
ANSI A 112.5.1
Listed by NSF
®
International
ISO 9001:2008 Certified
HUBLESS PIPE AND FITTINGS
All cast iron soil pipe and fittings shall be marked
with the collective trademark of
the Cast Iron Soil Pipe Institute.
CISPI Standard 301
ASTM A 888
Listed by NSF
®
International
ISO 9001:2008 Certified
HUBLESS COUPLINGS
CISPI Standard 310
ASTM C 1277
Certified by NSF
®
International
HUBLESS HEAVY DUTY COUPLINGS
ASTM C 1540
COMPRESSION GASKETS
ASTM C 564
CISPI HSN 85
This is to certify that all cast iron pipe and fittings manufactured by Charlotte Pipe and Foundry are
made in the United States and conform to the following standards:
• NEVER test with or transport/store
compressed air or gas in Cast Iron pipe
or fittings.
• NEVER test Cast Iron pipe or fittings
with compressed air or gas.
• ONLY use Cast Iron pipe and fittings
for drain, waste and vent or sanitary
sewer applications.
Testing with or use of compressed air or gas in Cast Iron
pipe or fittings can result in explosive failures and cause
severe injury or death.