SDS

PVC Pipe and Fittings
Date updated: 1/14/14
SAFETY DATA SHEET
Revision Date: 12/1/2013 Page 5 of 8
higher degree of protection: safety glasses with side shields. If adhesives or other substances are used with this product,
refer to the product manufacturer’s safety data sheet for applicable eye and face protective measures.
9. PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE:
Solid. White/grey
ODOR:
Not applicable.
ODOR THRESHOLD:
Not available
BOILING POINT:
Not available
FLASH POINT:
Not applicable
FLAMMABILITY:
Melted product is flammable.
AUTOIGNITION TEMPERATURE:
Not applicable
DECOMPOSITION TEMPERATURE:
Not available
LOWER/UPPER EXPLOSION LIMITS:
Not available
VAPOR PRESSURE:
Not available
LIQUID DENSITY:
Not available
SPECIFIC GRAVITY:
Approximately 1.4
MELTING POINT:
Not available
pH:
Not available
SOLUBILITY:
Insoluble
% VOLATILE:
Not available
VISCOSITY:
Not available
10. STABILITY AND REACTIVITY
Stability:
Stable at normal temperatures and pressures.
Reactivity:
Stable at normal temperatures and pressures.
Conditions to avoid:
Heat, flames, sparks and other sources of ignition.
Incompatible materials/conditions:
Consult the Charlotte Pipe and Foundry chemical resistance guide.
Hazardous decomposition products:
Hydrogen chloride, carbon oxides, small amounts of benzene and aromatic and
aliphatic hydrocarbons, phosgene.
Hazardous polymerization:
Not available.
11. TOXICOLOGICAL INFORMATION
ACUTE TOXICITY:
No toxicological data is available for the finished product.