Specifications

m4
5000 SP BATTERY CHARGERS
2000 SP BATTERY CHARGERS
5000 SP Series chargers feature a battery type selector switch, allowing you to
charge Lead Acid, Gel or AGM batteries. They are tested by Marine UL for
safety and durability against impact, vibration, temperature and shock. 3-stage
charging with temperature compensation (30 Amp and greater models) delivers
the greatest charge when the battery is most able to accept it, prevents over-
charging and extends battery life. Up to 3 battery banks can be simultaneously
restored. These units also act as a power supply providing constant voltage to
DC components such as bilge pumps or DC lighting. A convenient design
features an easy-to-read DC ammeter, access to terminal connections and
fuses and exterior slots for easy mounting. Safety features include ignition and
reverse-polarity protection. These units are designed with corrosion-resistant
components, a heavy-duty enclosure and heat sink for durability in the marine
environment. Units run cool and quiet, without generating significant RFI or EMI
interference. All units are Marine UL listed and are designed for low emissions.
Dripshield included. 5-year limited manufacturer’s warranty, made in the USA.
10 93-12105SP-A N/A
15 93-12155SP-A N/A
20 93-12205SP-A 9C-12205SPI-A
30 93-12305SP-A 9C-12305SPI-A
40 93-12405SP-A 9C-12405SPI-A
50 93-12505SP-A 9C-12505SPI-A
60 93-12605SP-A 9C-12605SPI-A
80 93-12805SP-A 9C-12805SPI-A
100 93-121005SP-A 9C-121005SPI-A
120 VAC · 50/60 Hz
Amperage
220 VAC · 50/60 Hz
12 Volt Models
10 93-24105SP-A N/A
20 93-24205SP-A 9C-24205SPI-A
30 93-24305SP-A 9C-24305SPI-A
40 93-24405SP-A 9C-24405SPI-A
50 93-24505SP-A 9C-24505SPI-A
60 93-24605SP-A 9C-24605SPI-A
120 VAC · 50/60 Hz
Amperage
220 VAC · 50/60 Hz
24 Volt Models
120 VAC · 50/60 Hz
Amperage
10 93-12102SP-A
15 93-12152SP-A
20 93-12202SP-A
30 93-12302SP-A
40 93-12402SP-A
50 93-12502SP-A
12 Volt Models
An excellent choice for value-priced, high-performance DC charging, the 2000
SP Series units include a battery type selector switch allowing you to charge
Lead Acid, Gel or AGM batteries. 3-stage charging delivers the greatest charge
when the battery is most able to accept it, preventing overcharging and
extending battery life. Units restore up to 3 banks simultaneously. Other
features include the ability to act as a power supply, ignition and reverse-
polarity protected, easy-to-read DC ammeter, corrosion-resistant components
and housing, and a heavy-duty heat sink design. Exterior slots allow for easy
mounting. 2-year limited manufacturer’s warranty, made in the USA.
Specifications
Battery Types: Lead Acid, Gel or AGM
Charge Voltage Bulk: 14.5V / 14.2V / 14.2V
Charge Voltage Float: 13.4V / 13.4V / 13.35V
DC Output Voltage: 12V
AC Input Voltage: 95-140VAC
Frequency: 50Hz or 60Hz
Temperature Range: -20ºC to 55ºC
Safety Features: Thermal, over current, reverse polarity and ignition protected
Housing: Anodized Aluminum
Dimensions: 10-30 amp: 8.125”x9.625”x3.75”, 40 amp: 10.5”x9.625”x3.75”,
50 amp: 13.25”x9.625”x3.75”
Specifications
Battery Types: Lead Acid, Gel or AGM
Charge Voltage Bulk: 14.5V / 14.2V / 14.2V
Charge Voltage Float: 13.4V / 13.4V / 13.35V
DC Output Voltage: 12V or 24V
AC Input Voltage: 95-140VAC or 200-240VAC
Frequency: 50Hz or 60Hz
Temperature Range: -20ºC to 55ºC
Safety Features: Thermal, over current, reverse polarity and ignition protected
Housing: Anodized Aluminum
Dimensions (12V): 10-20 amp: 8.125”x9.625”x3.75”, 30 amp: 10.5”x9.625”x3.75”,
40 amp: 13.25”x9.625”x3.75”, 50-60 amp: 15.25”x9.625”x3.75”,
80-100 amp: 21.5”x9.625”x3.825” (see website for 24V model dimensions)
21-104589-0
93-TEMPPROBE-A
Replacement Dripshield for 10 to 40 amp 5000 SP Series Battery Chargers
Temperature Probe for 30, 80 & 100 amp 12 volt models and 50 & 100 amp 24 volt models