Specifications

m10
C-POWER
®
SURGE SUPPRESSORS
A LOOK AT CHARLES’ CASEY, IL
MANUFACTURING CENTER
When you see the “Made in the USA” stamp on a Charles Industries’
battery charger, isolation transformer, cord set or any other product, take
a moment to consider exactly what that means. For the city of Casey,
Illinois, that means jobs for US workers. It’s a testament to the pride and
dedication of those workers as they strive to provide you with the
highest quality, most reliable and safest marine products available
anywhere.
Day in and day out at our Marine Products Manufacturing Center in
Casey, our experienced workforce puts into practice our commitment to
quality. More than 90% of the facility’s employees have 5 or more years
experience at Charles. Our employees are some of the most
knowledgeable, talented, and dedicated workers in the industry, and their
manufacturing experience translates into superiorly made AC and DC
electrical equipment that is both rugged and reliable.
Our Casey facility, along with Charles three other US
manufacturing centers, is certified to ISO 9001:2008
international quality management system standards.
Charles employs environmentally responsible manufacturing methods
and gives back to the communities it is a part of through educational
programs and endowments. Charles Marine Group is also proud to
support charities such as the Shake-A-Leg Sailing Program for disabled
and disadvantage participants, and the Judd Goldman Adaptive Sailing
Foundation.
Amperage
93-SS50/100-A
50/100 amps
120/240 VAC
7.5”x9”x5.25”
3.55 lbs.
VAC/VDC
Dimensions
Weight
93-SS30-A
30 amps
120 VAC
7.5”x9”x5.25”
3.55 lbs.
93-SPRSR-A
—
12 or 24 VDC
6.75”x5”x2.38”
2.5 lbs.
Product No.
93-SS12-A
—
12 VDC
7.5”x9”x5.25”
3.55 lbs.
93-SS24-A
—
24 VDC
7.5”x9”x5.25”
3.55 lbs.
DC Units
EMI
AC Units
Charles has designed surge protection devices specifically for onboard marine use.
These products protect valuable AC and DC systems from power surges and spikes.
An EMI suppressor unit is also available to protect against DC transients created by
trim tab pumps. 2-year limited manufacturer’s warranty, made in the USA.
Features
• Utilize Metal Oxide Varistor (MOV) technology
• Low impedance construction requires little energy
to function
• Thermal and short circuit fusing for safety
• Corrosion-resistant, aluminum housing
• Solid-state diagnostics
• Ignition protected
Special AC Unit Features
• All mode protection
• Suppression of surge current up to 90,000 amps
Special DC Unit Features
• Bi-directional
• 5 nanosecond response time
EMI Suppressor
In some cases, the hydraulic solenoid controlled
pump utilized in trim tabs can create DC
transients. To protect equipment from these
transients, Charles has designed the EMI
Suppressor. This cost-competitive, compact unit
stops transients in their tracks before they can
affect onboard equipment.
MADE IN THE