User`s guide

Section 360−381−S02
8
4.1.1. Adding/Deleting a User
Use the following steps to add or delete a user. NMS user names and passwords should be limited to ten charac-
ters.
Step Action
1. To insert a user, press <Insert> or select + from the tool bar.
2. To delete a user, press <Ctrl> <Del> or select − from the tool bar.
4.1.2. Changing User Information
Use the following steps to change the user information.
Step Action System Response
1. Move the cursor to the required position.
2. Modify the data An “I” is displayed on the first column to indicate
the user data has been modified.
3. To save the modified data, click  on the tool bar. The sign on the first column changes to a triangle
when the data has been saved.
4.2 Equipment Management
Because the NMS may be used to manage several ICBs, the equipment addressing must be assigned through
this dialog box. The equipment is accessed through a combination of the NMS address and the IP address. Both
must be correct for the equipment to be managed through the management software.
From the Main Menu bar, select Database  Equipment Management.
Figure 3. Equipment Management Dialog Box