User`s guide

Section 360−381−S02
37
Step System ResponseAction
3. Enter a file name The file name appears with the extension .dat
4. Select Save The file is saved.
8.5.2. Retrieve Provisioning
To retrieve provisioning from a previously saved file select Maintenance " Config Update from the menu and
use the following steps.
Step Action System Response
1. Select Load File A new screen will appear.
2. Choose the directory where the file is saved The default directory is:
C:\Program Files\Charles\NMS Manager
3. Select a file File is highlighted.
4. Select Open
5. Select Update File is loaded into the ICB.
9. ADMINISTRATION
Use the Administration menu to add and delete users and to see which users have system access. This menu
refers ONLY to the ICB software; you cannot use this menu to add users to the Network Management system.
9.1 Create a New User
Use the following steps to create a new user on the system.
Note: Spaces are not allowed in the user name or password. A user name and password should not exceed
eight characters.
Step Action System Response
1. Select Administration " Create New User Opens the Create New User dialog box (see Figure 33).
2. Enter the new user’s name.
3. Enter a password for the new user.
4. Select the new user’s security level. Guest= Allows access to status and performance data.
User= Full system access except for user maintenance.
Supervisor= Full system access.
5. Select OK Enters the new user into the system, confirms the pass-
word and closes the dialog box.