User`s guide

Section 360−381−S02

Use the following steps to change the time slot mode:

Step Action System Response

1. Select the mode you want the time slot set to.

2. Select the time slot you want to edit. Changes the slot information to the corresponding

color.

3. Repeat steps 1 and 2 for any other slots you want

to change.

4. Click Close to save changes and close the dialog

box.

6. STATUS MENU

Use the following sections to check the system status. Once retrieved, system status will be displayed in the main

screen as shown in Figure 18.

Figure 18. Screen showing retrieved status in the Message area and the Alarm area

6.1 Retrieve T1 Parameter

Select Status"Retrieve T1 Parameter. Retrieves the parameters of the T1 card and displays them in the Mes-

sage area of the main screen.

6.2 Retrieve T1 Alarm Status

Select Status"Retrieve T1 Alarm Status. Retrieves any current alarms on the T1 card and displays them in the

Alarms area of the main screen.

6.3 Retrieve Inventory Data

Retrieves basic data about any card in the system.

Use the following steps to retrieve inventory data.