User`s guide

Section 360−381−S02
17
5.3.3. E&M Parameters (for 3652-80 12 Channel E&M Unit)
Figure 10. E&M Parameter Settings
Parameter Possible Choices Description
Channel Selection 1−12 (if in Card 1 slot) Select the channel the parameters will be applied
to Each channel can be configured individually
13−24 (if in Card 2 slot)
to. Each channel can be configured individually.
25−30 (if in half-size slot)
Channel Type Type 1−5 Select E&M signaling lead type
Transmission Only No signaling leads used
Forced Busy ON or OFF Select ON to force local channel busy
CGA Immediate Idle or Busy CGA immediate conditioning
CGA Delayed Idle or Busy CGA conditioning after alarm delay
TTLP Level (dBm) −19.0 to +13.0 dBm
−19.0 to +7.0 dBm
Transmit TLP level (4-wire mode)
Transmit TLP level (2-wire mode)
RTLP Level (dBm) −19.0 to +13.0 dBm
−19.0 to +7.0 dBm
Receive TLP level (4-wire mode)
Receive TLP level (2-wire mode)