User`s guide

Section 360−381−S02
10
Table 3. Remote NMS Address Lookup Table
Local NMS Address 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Local ADDRESS ID
switch setting
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Remote ADDRESS
ID Switch Setting
1 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
2 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
3 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64
4 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80
5 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96
6 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112
7 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128
5. ICB MANAGEMENT SOFTWARE
Use the ICB Management software to configure and monitor the cards used in the ICB system. Menus are avail-
able to set up all parameters of the T1 controller and circuit cards.
Use the following steps to open the ICB Management Software:
Step Action System Response
1. Double-click the ICB equipment icon on the connected
equipment list box (right window) of the NMS Manager
main screen (see Figure 2).
Opens the ICB Management log in dialog box.
2. Enter an ICB user name and password, or the default
user name piad (case-sensitive) and default pass-
word 1234.
Note: Change the user name and password as soon
as possible. See the Administration section for
instructions.
Opens the main ICB management screen
(Figure 4).