User`s guide

Section 360−381−C02
28
Parameter Option Description
Nx56/64K 1 thru 24 Depends on bandwidth desired and time slots allocated
Base Setting 56K or 64K Base data rate
6. USER ADMINISTRATION
Use the User Administration menu to add and delete users.
Figure 24. User Administration Menu
6.1 Create a New User
Use the following steps to create a new user on the system.
Note: User names and passwords must not contain blank spaces, and should be limited to eight characters.
Step Action System Response
1. Select Create New User and press <Enter> Asks for the new user’s name
2. Type the new user’s name and press <Enter> Asks for the new user’s password
3. Type a password for the new user and press <Enter> Asks to verify the new user’s password
4. Type the new user’s password a second time and
press <Enter>
Asks you to select the new user’s security level
5. Select the new user’s security level
Guest= Allows access to status and performance data
User= Full system access except for user mainte-
nance
Super user= Full system access and press <Enter>
Adds the new user to the system.
6.2 Delete User
Use the following steps to remove a user from the system: