User`s guide

Section 360−381−C02
27
Parameter DescriptionOption
Channel Type RS530 Select the serial interface connection type
V.35
V.36 (RS−449/422)
RS232
HIZ (factory test mode)
CTS Value Yes Force clear-to-send on
No Normal
DSR Value Yes Force data set ready on
No Normal
DCD Value Yes Force data carrier detect on
No Normal
V.54 LPBK Enable Enable/Disable Enable or disable V.54 loopback
DTE LL Loopback Enable/Disable Enable or disable DTE local loopback
Idle Mode 11111110 or 11111111 Select idle mode pattern
Zero Code Suppression Enable/Disable Force control code (18 Hex) if zero byte detected toward
the network
PRTS Enable/Disable Force request to send ON and continually send data
External Clock Enable/Disable Select an external input as a clock source.
5.8 Ethernet Router Parameters (for 3641-80 or 3648−80)
Figure 23. Ethernet Router Parameter Settings