User`s guide

ManualsBrandsCharles ManualsComputer equipment3641-80

Section 360−381−C02

Parameter Option Description

Channel Selection 1−12 (if in Card 1 slot) Select the channel the parameters will be applied

to Each channel can be configured individually

13−24 (if in Card 2 slot)

to. Each channel can be configured individually

25−30 (if in half size slot)

Card Type 2W/4W and 600/900 Indicates 2W/4W jumper settings and 600/900

jumper settings

Forced Busy YES or NO Select YES to force busy

Channel Type Type 1−5 Select E&M signaling lead type

Transmission Only No signaling leads used

TTLP Level (dBm) −19.0 to +13.0 dBm Transmit TLP level

RTLP Level (dBm) −19.0 to +13.0 dBm Receive TLP level

CGA Immediate Idle or Busy CGA immediate conditioning

CGA Delayed Idle or Busy CGA conditioning after alarm delay

5.4 OCU-DP Parameters (for 3632-80 12-Channel Office Channel Unit – Data Port)

Disable

64K

DSU

Alternating

CMI Code

BCH Err.

Correction

Zero Code

Suppression

Speed Sub.

Channel

CSU/

DSU

Latching

LPBK

Ch13

Ch14

Ch15

Ch16

Ch17

Ch18

Ch19

Ch20

Ch21

Ch22

Ch23

Ch24

Figure 19. OCU-DP Parameter Settings

Parameter Option Description

Channel Selection 1−12 (if in Card 1 slot) Select the channel the parameters will be applied to.

Each channel can be configured individually

13−24 (if in Card 2 slot)

Each channel can be configured individually

25−30 (if in half size slot)

Alternate CMI Code Enable/Disable Available for SW 56K data rate

BCH Error Correction Enable/Disable Enables error correction. Available for 19.2K, 56K and

64K data rates