User`s guide

Section 360−381−C02
22
Parameter DescriptionOption
Operating Mode FXS/GS Ground start
FXS/LS Loop start
PLARD/D3 Private line automatic ringdown
PLARD/D4 Private line automatic ringdown
MEGACOM/GS/immediate AT&T Megacom—ground start
MEGACOM/GS/wink AT&T Megacom—ground start
MEGACOM/LS AT&T Megacom—loop start
DPO Dial pulse originate
TTLP Level (dBm) −10.0 to +6.0 dBm Transmit TLP level
RTLP Level (dBm) −15.0 to +1.0 dBm Receive TLP level
Forced Busy YES or NO Select YES to force busy.
CGA Immediate Idle or Busy CGA—immediate conditioning
CGA Delayed Idle or Busy CGA—conditioning after alarm delay
Ring Mode Burst, continuous, interrupted Select ringing mode (PLARD only)
5.3 E&M Parameters (for 3652-80 12 Channel E&M Unit)
Use this screen to retrieve and/or change the parameters of the E&M unit.
Figure 18. E&M Parameter Settings