User`s guide

Section 360−381−C02
21
Parameter DescriptionOption
TTLP Level (dBm) −10.0 to +6.0 dBm Transmit TLP level
RTLP Level (dBm) −10.0 to +6.0 dBm Receive TLP level
Forced Busy YES or NO Select YES to force busy
CGA Immediate Idle or Busy CGA—immediate conditioning
CGA Delayed Idle or Busy CGA—conditioning after alarm delay
5.2 FXS Parameters (for 3657-80 12 Channel FXS/DPO Unit)
Use this screen to retrieve and/or change the parameters of the FXS/DPO unit.
Figure 17. FXS Parameter Settings
Parameter Option Description
Channel Selection 1−12 (if in Card 1 slot) Select the channel the parameters will be applied
to Each channel can be configured individually
13−24 (if in Card 2 slot)
to. Each channel can be configured individually
25−30 (if in half size slot)
Channel Impedance 600 ohms Loop matching impedance
900 ohms