User`s guide

Section 360−381−C02
18
Figure 14. Setting the Time Slot Allocation
4.15.1. Time Slot Mapping
Use the following steps to change the time slot mapping. Steps 1 through 3 unallocate channels from time slots.
Steps 4 through 7 allocate channels to time slots. Time slots/channels must be unallocated before they can be
allocated.
Step Action System Response
1. Display the channel to edit by pressing the <tab>
key
Channel is displayed.
2. Press <Enter> Channel is selected.
3. When asked, “Clear time slot?” Use the arrow
keys to select yes, and then press <Enter> to un-
allocate the channel from its allocated time slot.
Channel is unallocated.
4. Repeat steps 1 and 2 for all channels to be
unallocated
5. Press <tab> to highlight an unallocated channel
and then press <Enter>
Prompted to map the selected channel to a prima-
ry or secondary (if the equipment exists) T1 time
slot.
6. Select primary or secondary and then press
<Enter>
Map direction is selected.
7. Press <tab> to select the time slot to map to the
selected channel and then press <Enter>
The time slot is allocated appropriately for the card
type and card provisioning.
8. Press <t> to select the retrieve time slot status
screen
This screen displays a green square under all time
slots that have been allocated to a channel.