User`s guide

Section 360−381−C02
17
4.13 System Alarm Status
Use this selection to retrieve current alarms in the system. Highlight System Alarm Status and press <Enter> to
retrieve the alarms. To update the status, press “r” to reload the screen.
4.14 ICB Card RTC Time (Primary T1 Only)
Use this selection to set the real-time clock on the ICB.
Figure 13. Real-Time Clock menu
To set the real-time clock, use the up/down arrows to move between the selections and press <Enter> to make
changes. When you are done, select Apply New Settings and press <Enter> to save your changes. Press <q>
to quit without saving.
4.15 Time Slot Allocation
Use the time slot allocation menu to change the time slot location of a channel within the primary or secondary T1
signal time slots. This menu is also used for drop and reinsert applications.