User`s guide

Section 360−381−C02

Figure 9. Performance Monitor screen with 15-Minute Performance Data

4.5.1. 15-Minute PM Data

Use the following steps to look at 15 minutes of PM data:

Step Action System Response

1. Select 15-min. and press <Enter>.

(Figure 9 shows the third 15-min-

ute segment)

Asks you what 15 minute period you want to look at. Choices are

0 to 96, with 0 specifying the current 15 minutes, and 96 specify-

ing 96 quarters (24 hours) prior. The actual date on which the data

was gathered is also displayed

2. Select a 15-minute interval and

press <Enter>

Retrieved data (errored seconds, severe errored seconds and un-

available second count) is displayed at the bottom of the screen

3. Press <Enter> to look at more data

(another 15-minute period or up-

date current status), or <q> to quit.

4.5.2. One Day PM Data

Use the following steps to look at one day of PM data:

Step Action System Response

1. Select 1-day and press <Enter> Asks you what day you want to look at. Choices are 0 to 30, with

0 specifying the current day, and 30 specifying 30 days prior

2. Select a day interval and press

<Enter>

Retrieved data (errored seconds, severe errored seconds and un-

available second count) is displayed at the bottom of the screen.

The actual date on which the data was gathered is also displayed.

3. Press <Enter> to look at more data

(review current or previous day), or

<q> to quit.