Specifications

Section 364-180-202
5
1.9 Indicators/Switches
The router has 2 indicators per port on the front of the unit.
100 Base-T LED indicates when the Ethernet connection has detected that it is connected to a network
device that supports 100 Base-T. When the indicator is OFF, the Ethernet connection is running at 10
Base-T.
Link/Act LED indicates Ethernet activity detected on the Local Area Network (LAN) Ethernet port.
The router has one switch on the front of the unit.
RESET switch located on the front of the unit will force a ‘soft’ reset. This will restore the router
configuration to the last ‘saved’ configuration.
The 3641-80 has one switch on the rear of the unit.
HUB/PC switch is located on the rear of the 3641-80 unit. In the HUB position the Ethernet connection
should be connected to an Ethernet hub or switch. In the PC position the Ethernet connection should be
connected directly to a PC.
The 3648-80 has no switches on the rear of the unit.
2 INSPECTION
2.1 Inspection for Damages
Inspect the equipment thoroughly upon delivery. If the equipment has been damaged in transit,
immediately report the extent of damage to the transportation company.
2.2 Equipment Identification
Charles Industries’ equipment is identified by a model and issue number imprinted on the front panel or
located elsewhere on the equipment. Each time a major engineering design change is made on the
equipment, the issue number is advanced by 1 and imprinted on subsequent units manufactured.
Therefore, be sure to include both the model number and its issue number when making inquires about
the equipment.
2.3 Static Concerns
Each unit is shipped in static-protective packaging to prevent damages from electrostatic charges. Use
approved static-preventive measure, such as static-conductive wrist straps and a static-dissipative mat,
when handling units outside of their protective packaging. A unit intended for future use should be tested
as soon as possible and returned to its original protective packaging for storage.
This equipment contains static-sensitive electronic devices. To prevent electrostatic charges from
damaging static-sensitive units:
• Use approved static-preventive measures (such as static-conductive wrist straps and static-
dissipative mats) at all times whenever touching units outside of their original, shipped, protective
packaging.
• Do not ship or store units near strong electrostatic, electromagnetic, or magnetic fields.
• Always use the original static-protective packaging for shipping or storage. Return a tested unit to
its original protective packaging for storage.