Specifications

Issue 1.0, April 2006 Section 364-180-N02
©2006 Charles Industries, Ltd.
All rights reserved. Printed in United States of America.
86

Configuring Alerting
Alerting configuration for Intrusion allows you to send email or paging when there’s intrusion
upon your network. The alerting settings will take effect only when intrusion detection is enabled.
1. Go to the Policies, Triggers and Intrusion Detection section of the Security Interface
Configuration page. Click on Configure Alerting. The “Alerting Configuration” page is
displayed:
Figure 6-57 Web Tool – Security: Alerting Configuration for Intrusion page
Set Enabled to true if you want to send out email or paging. You have to open the outbound smtp
port in the firewall policy if you set Email Enabled to true. You have to open the outbound snpp
port in the firewall policy if you set Paging Enabled to true. You can send email to two email
The availability of features and technical specifications herein subject to change without notice.