Specifications

Issue 1.0, April 2006 Section 364-180-N02
©2006 Charles Industries, Ltd.
All rights reserved. Printed in United States of America.
56

DHCP Server mode
1. If you choose DHCP server in the DHCP Server Mode section, this will provide IP
addresses to computers connected to the router from within the default IP address pool. You
can edit your DHCP settings for a custom configuration by clicking the Configure button.
The “DHCP: enable server” page will appear then. Make any changes to the configuration
that are needed and then click the Apply button. The fields are defined below.
Figure 6-32 Web Tool – DHCP: enable server page
Address Range:
‧Use Default Range: This will enable the use of the router’s default address pool
(as shown). Checking this box will override any settings in the following two
fields.
‧Starting IP Address: This field allows you to define the first address of the range
of numbers in your custom address pool. The range will span between this number
The availability of features and technical specifications herein subject to change without notice.