Specifications

Issue 1.0, April 2006 Section 364-180-N02
©2006 Charles Industries, Ltd.
All rights reserved. Printed in United States of America.
40
value is 0. If you set this to any number other than 0, DLCI level FRF.12
segmentation is enabled. The range of the segment size recommended is 200 to
1500. For more information on FRF.12, see
http://www.frforum.com.
Port: sets the port that an existing Frame Relay transport uses to transport data. (The port is
always fr for frame relay routed.)
Figure 6-19 Web Tool – WAN connection: Edit Frame Relay channel page
In “Edit Ip Interface” page, the Ipaddr, Mask, and Dhcp are the same meaning as in Figure
6-17
. The MTU (maximum transmission unit) is the largest size frame that can be sent in
transmission. The default MTU is 1500 octets. The Enabled is set to true by default. If the
Enabled is set to false, the specified IP interface does not work.
The availability of features and technical specifications herein subject to change without notice.