Specifications

Issue 1.0, April 2006 Section 364-180-N02

2. To edit a currently defined frame relay routed service, click “Edit” link for that connection as

in Figure 6-15, then the page will appear as follows.

Figure 6-18 Web Tool – WAN connection: frame relay routed: Edit Service page

To edit the service, click on the links at the top of the edit page. The links include:

Edit ‘Service’, Edit ‘Frame Relay’, Edit ‘Frame Relay Channel’, Edit ‘IP Interface’, Edit ‘Rip

Versions’, and Edit ‘Tcp Mss Clamp’.

In “Edit Service” page, you can edit the creator name and the brief description of the service.

In “Edit Frame Relay Channel” page, the option fields include:

DLCI: sets the DLCI; the identifier for the Frame Relay data link channel that you are

using. The range of the DLCI is 16 to 1007.

Rx Max Pdu: sets the maximum Protocol Data Unit (PDU) size that can be received over

Frame Relay. The default value is 8192.

Tx Max Pdu: sets the maximum Protocol Data Unit (PDU) size that can be transmitted

over Frame Relay. The default value is 8192.

Chnl Segment Size: sets the size of the channel segment used by Frame Relay. The default

The availability of features and technical specifications herein subject to change without notice.