Specifications

Issue 1.0, April 2006 Section 364-180-N02
©2006 Charles Industries, Ltd.
All rights reserved. Printed in United States of America.
38
Frame Relay routed
1. If you select Frame Relay routed in the “WAN connection: create service” page, the
following page will appear. The option fields include:
Description: Enter a brief description for the service.
DLCI: DLCI (data link connection identifier) sets the identifier for the Frame Relay
data link channel that you are using. The range of the DLCI is 16 to 1007.
Encapsulation method: sets the RFC1490 encapsulation method used by Frame Relay. Each
DLCI can be multiplexed further if you are using RFC1490 multi-protocol
encapsulation. The choices are: Raw, Routed IP.
Use DHCP or WAN IP address: You must choose “Use DHCP” if you want to set the router
as a DHCP client.
After entering all the fields needed in this page, click Apply button.
Figure 6-17 Web Tool - WAN connection: Frame Relay routed page
Note: The maximum number of Frame Relay DLCI channels that can be created is
14.
The availability of features and technical specifications herein subject to change without notice.