Specifications
Issue 1.0, April 2006 Section 364-180-N02
©2006 Charles Industries, Ltd.
All rights reserved. Printed in United States of America.
27
Save config
After configuring or modifying the configuration of your router, and before powering it off or
rebooting it, you must save your configuration to the internal flash memory. Should you power
off or reboot the router without saving, you will lose the settings previously configured. Be sure
to save after making any change to your configuration.
1. Once you have completed configuring your router, click Configuration and then click Save
config from the left frame. The “Save configuration” page will appear. You will be asked to
confirm that you are ready to save. Click the Save button. Do not disturb the router while it is
writing to the Flash memory, as doing so may corrupt the firmware. Do not turn the power off
or disturb the router until the confirmation message has been displayed.
Figure 6-8 Web Tool – Save configuration Confirm page
The availability of features and technical specifications herein subject to change without notice.