Specifications

Issue 1.0, April 2006 Section 364-180-N02

3. Once the firmware upgrade is complete, the “Firmware Upgrade” page will refresh and

indicate a successful upgrade. You will need to restart in order for the upgrade to take effect.

Click the Restart button.

Figure 6-6 Web Tool – Firmware Upgrade Complete page

4. After the router card is restarted, it will receive the clock speed change message “Change

wan port's clock speed require save and restart” from the primary T1/E1 card (but you won’t

see the message on the web browser). You have to re-login the web browser, save the

configuration (refer to 0) and restart (refer to 0) the router card again.

Warning: Do not disturb or power off the router during the upgrade process.

Doing so may corrupt the firmware. Users must be patient to wait the result

screen appear when they are doing the firmware upgrade and save

configuration. If users interrupt the process arbitrarily, system could not run

normally, and users have to re-upgrade again.

The availability of features and technical specifications herein subject to change without notice.