Specifications

Issue 1.0, April 2006 Section 364-180-N02

6. Web Configuration Tool

6.1. About the Web Configuration

The Web Configuration tool provides a series of web pages that you can use to setup and

configure your Router card. There are three main menus. You can select each of the following

menus from the left frame of the main window:

 Status Menu: Information about the current setup and status of the system and system

hardware and options..

 System Menu: Information about the error log, upgrading the firmware and restarting the

system.

 Configuration Menu: Information about the current configuration of various system features

with options to change the configuration.

NOTE: There are certain features that are only accessible through the Web

Configuration Tool:

1. Digital signature certificates of IPSec

2. Remote upgrade firmware (by browser http-upload.tar file)

3. Errorlog

6.2. Factory Default Settings

If your required configuration exactly matches the settings below, the router will work for you as

pre-configured. After completing the installation, assigning your static IP address to your

computer’s TCP/IP settings, you should be able to make a connection to the Internet.

LAN Port: IP Address: 192.168.0.1

Subnet Mask: 255.255.255.0

DHCP Server: Disabled

Loopback: IP Address: 127.0.0.1

The availability of features and technical specifications herein subject to change without notice.