Specifications

Issue 1.0, April 2006 Section 364-180-N02

136

7.6. List of CLI Commands

The notation conventions for the parameter in the CLI commands list are as follows:

 Parameter values enclosed in < > must be specified.

 Parameters enclosed in [ ] are optional.

 Parameter values are separated by a vertical bar “|” only when one of the specified values can

be used.

 Parameter values are enclosed in { } when you must use one of the values specified.

For the details of each CLI command, please look up the Ethernet Router CLI Manual Section

364-180-C01.

Table 7-2 List of CLI commands

Group Command Parameter

Bridge

bridge add interface <name>

attach {<name>|<number>} <transport>

clear interfaces

delete interface {<name>|<number>}

detach {<name>|<number>}

list interfaces

set filterage <filter age>

interface {<name>|<number>} filtertype

{all|ip|pppoe}

spanning {enabled|disabled}

forwarddelay <delay>

hellotime <hellotime>

maxage <maxage>

priority <priority>

show

interface {<name>|<number>}

Console

console enable

process <console command>

The availability of features and technical specifications herein subject to change without notice.