Specifications

Issue 1.0, April 2006 Section 364-180-N02
©2006 Charles Industries, Ltd.
All rights reserved. Printed in United States of America.
124
7.4. CLI Application Examples
Before the application examples, you need to understand the following CLI terms.
Transports: A transport is a layer 2 session and everything below it. You can create a transport
and attach it to a bridge or router so that data can be bridged or routed via the attached transport.
Interface: bridges and routers both have interfaces. A single transport is attached to a bridge or
router via an interface.
Port: A transport is set to run on a certain port.
The table below lists the default names of the different ports or interfaces of the router card.
Table 7-1 Default names of different Interface/Transport/Port
Type Name
interface
ip, bridge
transport
ethernet, framerelay, pppoh
port
ethernet, fr, fb, hdlc
Note: the port names cannot be changed.
Note: After loading the scripts, save the configuration and restart the router
The availability of features and technical specifications herein subject to change without notice.