Specifications

Issue 1.0, April 2006 Section 364-180-N02

120

2. Router Card configurations get from PC the CLI commands bellow:

tftpc connect 172.16.100.88 (PC IP address: 172.16.100.88)

Successfully connest to 172.16.100.88 (Router Card connect with PC successfully)

tftpc get im.conf //flashfs/im.conf (Get Router Card configuration from PC. The file

name is “im.conf)

GET 13029 bytes from im.conf to //flashfs/im.conf (Get Router Card configuration from PC

successfully)

system restart

* For the details of the tftp console commands, please refer to Ethernet Router CLI Manual Section

364-180-C01.

Note: When you FTP to the router or use tftp command (CLI or console) in the router, you don't

need to change to any other directories. Just get or put the configuration file to the connected

directory directly.

You can exit the tftp console command mode by entering the “home” command to return to the

root command tree of the console mode. You can exit the console mode back to the CLI mode by

entering the “exit” command.

The availability of features and technical specifications herein subject to change without notice.