Specifications

Issue 1.0, April 2006 Section 364-180-N02

118

since the Console commands are mainly for customer support debug. You can also see usage of

some of the console commands in the following sections.

NOTE: There are certain features that are only accessible through the CLI Configuration Tool:

1. Webserver configuration

2. DHCP client parameters configuration (such as reboot time, retry time, backoff time, etc.)

3. Upload/download the configuration file to/from system/PC

4. Local upgrade firmware (via tftp/bootp protocol)

5. Set rip host route and set rip poison

6. Reset the router configuration to factory default settings.

7.1. Help Text for Using the CLI Commands

Within the CLI, the following functions can be used:

* Hitting ? halfway through a word shows all valid completions of that prefix

* Hitting ? after a word shows a list of the words that can follow it

* Hitting TAB halfway through a word completes it, if it is unique

* The UP and DOWN cursor keys move back and forward through the command history

* LEFT and RIGHT cursor keys can be used for line-editing, and CTRL+A and

CTRL+E move the cursor to the start and end of the line respectively

Pressing ? at the top-level prompt will display a list of the command groups available. Typing one

followed by a space and then hitting ? will show the subcommands within that group, and so on.

Task Command

List all command groups ?

ex. ?

List all commands under a group command group ?

ex. ethernet ?

The availability of features and technical specifications herein subject to change without notice.