Specifications

Issue 1.0, April 2006 Section 364-180-N02
©2006 Charles Industries, Ltd.
All rights reserved. Printed in United States of America.
117
7. CLI Configuration Tool
The router router card provides provisioning not only via the web browser but also the craft serial
port using Command Line Interface (CLI).
Login to CLI of the router via the serial console port of the router card or any terminal emulation
program to connect to the router card over the Ethernet. The default user names and passwords are
the same as those previously described in the Web configuration chapter (see Table 6-1).
Figure 7-1 Login CLI Configuration Tool
There are two types of commands available for use in router card: one is CLI commands, the other
is Console commands. Users with appropriate access permissions (superuser) can enter console
mode from the CLI by entering the “console enable” command and use the console commands.
Most of the console commands are the same with the CLI commands. Basically, users can use
“help”, “help all”, “home”, “exit” and etc…to search for help and switch the command mode.
The details of each CLI command are described in the Ethernet Router CLI Manual Section
364-180-C01 manual. While for Console commands, there are only a few commands described
The availability of features and technical specifications herein subject to change without notice.