Specifications

Issue 1.0, April 2006 Section 364-180-N02
©2006 Charles Industries, Ltd.
All rights reserved. Printed in United States of America.
109
5. In the ‘ISOS Clock Setting’ section, sets the router card system clock to a specific time and
date. This command can be used as an alternative to synchronizing the local system clock via
internal or external timeservers.
Figure 6-69 Web Tool – SNTP client: ISOS Clock Setting page
Syslog
1. Login to your router. Click Configuration from the left frame, and then click the Syslog link.
The “Syslog Client Configuration” page will appear.
Figure 6-70 Web Tool – Syslog Client Configuration page
2. Choose your level of severity from the drop-down menu in the Severity Threshold section (See
the table below for more information on each severity level). Then set the host name in the
Host Name section. Finally enter the IP address of the receiver in the Receiver section and
click the Change button to enter your settings. The device will now deliver all log files of
The availability of features and technical specifications herein subject to change without notice.