Specifications

Issue 1.0, April 2006 Section 364-180-N02

108

3. In the ‘SNTP Client General Configuration Parameters’ section, set the Timezone. Sixty-four

of the world’s most prominent time zones are represented (including those using standard time

and summer/daylight savings time).

Figure 6-68 Web Tool – SNTP client: SNTP Client General Configuration Parameters

page

4. Next, in the ‘SNTP Client General Configuration Parameters’ section (see the figure in

previous step), set the:

transmit packet response timeout value (in seconds): sets the received packet response timeout

value (in seconds) upon sync request initiation. After timeout, if the transmit packet retries value

is set, an attempt will be retried.

transmit packet retries value: sets the number of packet retry attempts when no response is

received from a timeserver. The SNTP client will send another packet for synchronization after a

timeout.

automatic resynchronization polling value (in minutes 0-60): sets the SNTP client to

automatically send a time synchronization request (specific to the mode) to the network at a

specific interval. If the poll-interval is set to 0, the polling mechanism will be disabled.

The availability of features and technical specifications herein subject to change without notice.