Specifications

Issue 1.0, April 2006 Section 364-180-N02
©2006 Charles Industries, Ltd.
All rights reserved. Printed in United States of America.
102

PPTP and L2TP Configuration
1. Log in to your router. From the left frame, click Configuration and then click the PPTP or
L2TP link, depending on your needs. In the PPTP or L2TP Configuration page, set the
starting and ending IP address of the pptp/l2tp ip pool in the IP Pool section.
Figure 6-63 Web Tool – PPTP Configuration page
2. From the User Authentication section, click the Set up users link. The “Authentication” page
will appear. Click the Create a new user link, then the “Authentication: Create User”
page will appear. .
Figure 6-64 Web Tool – PPTP: Authentication: create user page
The availability of features and technical specifications herein subject to change without notice.