Specifications

Issue 1.0, April 2006 Section 364-180-N02

101

NOTE: If you have HyperTerminal running to confirm your changes, switch to

HyperTerminal to verify the save to flashfs.

10. Now, on the top of the “IPSec Configuration” page, enter your Negotiation ID (You must

enter what you entered as Subject Alternative Name in Step 4). Also enter your Intranet

address and Intranet subnet mask.

11. Next, click the “Add Endpoint” link in the “Endpoint Configuration” section. A page will

appear. Enter your Endpoint ID, termination IP address, and choose Digital Signature as

your “Authentication Method”.

Once you have configured both sides of the connection, you can test the tunnel

using PING. To verify that your tunnel is working, ping the IP address of a

computer on the remote network. If you ping the main network, it will onl

trigger phase 1 and 2 negotiations. You will only receive a reply if you ping an

actual IP address on the network, such as the router WAN IP address. You can

use Microsoft HyperTerminal to view phase 1 and 2 negotiations.

The availability of features and technical specifications herein subject to change without notice.