User's Manual

42 300SR/ST - OPERATION
LOCATE LINE: PASSIVE LOCATION
42 300SR/ST - OPERATION
LOCATE LINE: PASSIVE LOCATION
Special Situations
Situation What to try
Signal is lost. Walk in a circle to detect a tee or
bend in the line.
Signal varies from low to
high and is unstable.
Check the transmitter connection.
If connection is good and signal is
still unstable, mark as a hand-dig
area.
Receiver does not function
properly.
Receiver gain could be set too
high or low. Lower or raise gain to
locate the line.
Three dashes appear on
the display when depth
button is pressed.
See CARE AND ERROR CODES.
Special Situations
Situation What to try
Signal is lost. Walk in a circle to detect a tee or
bend in the line.
Signal varies from low to
high and is unstable.
Check the transmitter connection.
If connection is good and signal is
still unstable, mark as a hand-dig
area.
Receiver does not function
properly.
Receiver gain could be set too
high or low. Lower or raise gain to
locate the line.
Three dashes appear on
the display when depth
button is pressed.
See CARE AND ERROR CODES.